Equipment Specs

We travel with all of our own gear high quality gear, including stage and dance floor lighting. All of our electrical equipment is fully PAT tested*, and when required we can arrange for our current testing certificates to be supplied direct to your venue for inspection prior to your event.

For further details regarding our public liability insurance or any other help or information please call Johnny (07958 067829) or Anne (07969 961669) or email

PA Speaker Tops x2


  • system type: Self powered 15”  (pole mounted)
  • power: 624 watts
  • dimensions: 673 mm x 406 mm x 368 mm (26.5” x 16” x 14.5”)
  • weight: 14.8kg

PA Speaker Subs x2 


  • system type: Self powered 18″
  • power:  500 W continuous, 1000 W peak
  • dimensions: 617 mm x 569 mm x 652 mm (24.3 in x 22.4 in x 25.7 in)
  • weight: 29.5kg

Mixing Desk

Allen & Heath ZED-22FX:

  • 16 mono channels
  • 3 band EQ
  • 4 auxes
  • 4 stereo channels with 2-band EQ and inputs for extra sources (ipod/laptop etc)
  • dimensions: 645 mm x 465 mm x 98mm (25.4″ x 17.7″ x 3.9″)
  • weight: 10.5 kg

Graphic EQ Unit

Samson S-Curve 231:

  • dual 31-band EQ
  • weight 2.31 kg
  • power usage- 22W

Portable Lighting Rig

x2 Cameo Multi PAR 2 LED Panel Stage Lighting Bar

  • 4 x 7 Ultra bright 3-Watt TRI LEDs
  • Tripod-mounting using 28-mm TV adapter
  • Dimensions: 1030 x 290 x 100 mm
  • Weight: 10 kg
  • Power usage: 100W

x2 Equinox Triclops LED Centrepiece Scanner Disco Light

  • 72 Ultra-bright LEDs
  • Dimensions: 390 x 166 x 325 mm
  • Weight: 4.3 kg
  • Power usage: 20W

Bass Cabinet

Genz Benz NEOX-212T

  • 2×12″ with tweeter
  • Power Handling RMS: 600W
  • Frequency +/- 3db: 42-18K Hz Sensitivity
  • 1W/1M : 101 db
Nominal Impedance :4 ohm
  • Crossover Point : 4 K Hz
  • Weight Lbs. :50
  • Dimensions HxWxD: 31″ x 21 1/4 ” x 16 1/2″

Bass Amp

Genz Benz Shuttle 6.0

  • Power: 375W/8 ohms; 600W/4 ohms
  • Analog 12AX7 Tube Preamp
  • Weight: 3.75lbs
Dimensions: 2 1/2″ x 10″ x 10 1/2″

Electric Guitar Amp

BOSS GT-6 Guitar Effects Processor

  • Pedal board with amp simulator straight to sound desk.

Floor Monitors x2

Laney CXP110 x1 / Laney CP10 x1

  • system type: Self powered 10″
  • power: 65 Watts
  • dimensions: Width 468 x Height 274 x Depth 347
  • weight: 13kg

(1 Further headphone monitor channel taken from the sound desk.)

Input Sources

  • Drum Kit: Mics (5 channel – kick, snare, hi-hat, tom1, tom2, overhead)
  • Flute: Mic (SD Systems LCM 70)  XLR from LP preamp power supply (9v battery  or phantom power)
  • MC Vocal: Mic (Shure – SM68)
  • Violin: Line via EQ or XLR 48v phantom power (violinist dependant)
  • Electric Guitar: Line from pedal board
  • Bass: XLR from amp head

Stage Dimensions

Although a stage is nice where available it is not a requirement. We are more than happy to set up on the floor. An ideal sized playing area would be 6m long x 2m deep*.

*A bare minimum sized playing area would be 5m long x 2m deep, or alternatively 4.5m long x 3m deep – though we have managed with less on occasion.

Power Requirements

Typical hotel or indoor venue = 2440w*
*Average power consumption under typical circumstances. Music varies in volume so exact power usage will fluctuate from moment to moment.

Marquees & outdoor performances = 2800w – 3000w*
*Average power consumption under typical circumstances. We strongly recommend that power is run to the marquee from at least 2 different sources ie. different sockets, and ultimately from more than a single plug. This should avoid any likelihood of blowing a fuse or overheating a single cable or socket which may also be powering things like your marquee lighting, bar fridge, etc.

Peak power = 4118w*
*Absolute total of what our system is capable of consuming. In reality, any spike in volume is likely to consume considerably less than this.